Belkin ADSL Modem with Wireless 802.11g Router Provozní pokyny Strana 188

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 204
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 187
DG834G Reference Manual
C-14 NETGEAR VPN Configuration
v3.0, September 2005
a.
In Step 1, enter toDG834 for the Connection Name.
b. In Step 2, enter dg834g.dyndns.org for the remote WAN's IP address.
c. In Step 3, enter the following:
IP Address = 10.5.6.1
Subnet Mask = 255.255.255.0
7. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834G.
a. Open the command prompt (Start -> Run -> cmd)
b. ping 172.23.9.1
Figure C-11: ping 172.23.9.1
Note: The pings may fail the first time. If this happens, try the pings a second time.
Configuration Summary (Telecommuter Example)
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.
Zobrazit stránku 187
1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 203 204

Komentáře k této Příručce

Žádné komentáře