Belkin ADSL Modem with Wireless 802.11g Router Provozní pokyny Strana 136

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 204
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 135
DG834G Reference Manual
8-26 Virtual Private Networking
v3.0, September 2005
6. Repeat for the DG834G on LAN B and pay special attention to use the following network
settings as appropriate.
WAN IP of the remote VPN gateway (e.g., 14.15.16.17)
LAN IP settings of the remote VPN gateway:
IP Address (e.g, 192.168.0.1)
Subnet Mask (e.g., 255.255.255.0)
Preshared Key (e.g., 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
a. Open the DG834G management interface and click on VPN Status to get the VPN Status/
Log screen (Figure 8-27).
Figure 8-27: VPN Status/Log Screen
b. Click on VPN Status (Figure 8-29) to get the Current VPN Tunnels (SAs) screen
(Figure 8-28). Click on Connect for the VPN tunnel you want to activate.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page -27 for information on the other ways.
Zobrazit stránku 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 203 204

Komentáře k této Příručce

Žádné komentáře