Belkin F5D52314 - Cable/DSL Gateway Router Uživatelský manuál stáhnout pdf (Strana 17)

The following is an example of what a network router LAN configuration page should

look like. You typically access the LAN settings via a web browser and type in the

routers IP address, in this example it is 192.168.2.1. This is a typical IP address of

routers.

Figure 9

This is the IP address of the router. If you type in 192.168.2.1 into a web browser, the

displayed router settings shown above should be displayed. The first three numbers will

need to be the same on the connected Calmotion LANCNC devices. The last number is

essentially the device number. The router is 1, the computers will be provided a number

from 2 to 100, and the Calmotion LANCNC will need to have a number from 101 to 254.

This is the subnet mask. This should never be changed.

Basically, these settings will provide 99 IP addresses to the DHCP, so that 99 computers

can automatically get an IP address from the router’s DHCP. It also frees up IP addresses

from 101 to 254 to static IP address devices, i.e. Calmotion LANCNC.

- 17 -

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Žádné komentáře

Belkin F5D52314 - Cable/DSL Gateway Router Uživatelský manuál Strana 17