Belkin OmniView Uživatelský manuál stáhnout pdf (Strana 42)

4140

The mouse is lost when I switch to a different port.

• Check that the mouse you are using is connected properly to the console port

of the PRO3 KVM Switch.

• Tighten any loose cable connections.

• If you are using a mouse driver that was included with your mouse, uninstall it

and install the standard Microsoft mouse driver.

• Make sure the mouse works when directly plugged into the server.

• If the server is coming out of standby mode, allow up to one minute to regain

mouse function.

• De-activate power-management schemes on the PC with which you are

experiencing problems.

• Try a different mouse.

The mouse is not detected at boot up.

• Check the cables and make sure that they are inserted correctly.

The server boots up, but the mouse does not work.

• Make sure the mouse is plugged in properly.

• Make sure the mouse works when directly plugged into the server. Rebooting

may be necessary when trying this.

• Try a different mouse.

When I switch from one port to another, mouse movement is

completely erratic.

• Make sure you do not have more than one mouse driver installed. Make sure

that the driver is either for a standard PS/2 or USB mouse, or a Microsoft

server-compatible PS/2 or USB mouse.

• Make sure you do not have any mouse drivers loaded in your “CONFIG.SYS” or

“AUTOEXEC.BAT” files.

• Avoid moving the mouse or pressing the mouse button when switching ports

on the PRO3 KVM Switch.

Troubleshooting

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Žádné komentáře

Belkin OmniView Uživatelský manuál Strana 42