Belkin OmniView F1DP116S Uživatelský manuál stáhnout pdf (Strana 32)

P75598- Belkin OmniView Serial Console

4.1.4.1 Console Server Mode

Configuring a serial port as a console server creates a TCP socket on the unit that listens

to a Telnet or SSH client connection. When you connect to the TCP socket, you have

access to the device attached to the serial port as if the device were connected directly to

the network. Data stream can be sent back and forth between the device and the

Telnet/SSH client program.

RawTCP is also supported with the Console Server Mode.

The following parameters are configurable In console server mode:

Listening TCP port number

You can also access a serial port through the IP address of the Serial Console and the

Listening TCP port number of the serial port.

If the IP address of the Serial Console and the serial port are assigned as

192.168.123.100 and Listening TCP port number 4001, the user can connect to the port as

follows:

telnet 192.168.123.100 4001

32 / 66

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 65 66

Žádné komentáře

Belkin OmniView F1DP116S Uživatelský manuál Strana 32