Belkin N1 Wireless Modem Router F5D8631-4 Uživatelský manuál stáhnout pdf (Strana 50)

EN-48

Using the Web-Based Advanced User Interface

EN-48

section

Using the Access Point Mode

Note: This advanced feature should be employed by advanced users

only. The Modem Router can be configured to work as a wireless

network access point. Using this mode will defeat the NAT IP sharing

feature and DHCP server. In AP mode, the Modem Router will need

to be configured with an IP address that is in the same subnet as

the rest of the network that you will bridge to. The default IP address

is 192.168.2.254 and subnet mask is 255.255.255.0. These can be

customized for your need.

1. Enable the AP mode my selecting “Enable” in the “Use as Access

Point only” page. When you select this option, you will be able to

change the IP settings.

2. Set your IP settings to match your network. Click “Apply

Changes”.

3. Connect a cable from the WAN port on the Modem Router to your

existing network.

The Modem Router is now acting as an access point. To access the

Modem Router advanced user interface again, type the IP address

you specified into your browser’s navigation bar. You can set the

encryption settings, MAC address filtering, SSID, and channel normally.

(1)

(2)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 101 102

Žádné komentáře

Belkin N1 Wireless Modem Router F5D8631-4 Uživatelský manuál Strana 50